myMaker - Events - Chinese Version
Search Product, Company or News
Home > Plastic & Rubber Machinery > Plastic Cracking Machines > News
Rapid Granulator AB logo
Rapid Granulator AB
Company  |  News  |  Products  |  Contact Us

Rapid unveils next-generation shredders for plastics - The Raptor Series


Bredaryd, Sweden - September 6, 2016 - Size-reduction technology specialist Rapid Granulator is introducing a new family of shredders for plastics: The Raptor Series. These modularly designed units feature a world-first with their "open-hearted" design. Other notable design features include a unique cutting system, tilt-back hopper, and design for integrated granulation. The Raptor Series has been designed using the more than 70 years of accumulated knowledge in size reduction, in order to maximize productivity with a minimum cost of ownership. During K 2016, the Raptor Series is on display at the Rapid Granulator booth (Hall 9 - stand E19).

"The Raptor Series is a shredder and granulator hybrid with the shredder's heavy-duty cutting technology combined with granulator features such as Rapid's "open hearted" design that makes it super-easy to operate, service and clean," says Rapid Global Sales and Marketing Director Bengt Rimark. "The Raptor Series has been developed with 100% focus on every single detail that is of importance for plastic processors, in order to create simplicity and a minimum cost of ownership. As we develop and manufacture both granulators and shredders, we make sure that the machines are tailored for each other and that we can provide complete recycling systems, direct from Rapid."

The Rapid "open hearted" design of the Raptor enables quick and direct access to the shredder rotor and cutter chamber, drastically simplifying the cleaning and service process. The front door, hinged on the side, provides unrestricted access to the rotor and to the screen, which is mounted in the door. Once the front door is open, the shredder hopper mounted on a rear hinge can be tilted back.

Rapid offers 36 base configurations of the Raptor in order to handle various customer applications. The modular systems feature two diameters and two widths (31.5" and 53"/800 mm and 1.350 mm). There are two system designs for pushing material into the rotor - FlexiPUSH and PowerPUSH. The PowerPUSH is available with an extended pusher length (PowerPUSH-XT); there are also three different cutting systems: Quad Cut, Claw, and Power Wedge.

The low cost of ownership of the new Raptor Series is accomplished through the ease and speed with which it can be cleaned and maintained. The machine can be in a completely open position in less than one minute after it has stopped running. Once the machine is open, all fasteners are accessible from the outside using air driven tools. The access made possible by the "open hearted" designs makes any contamination immediately visible.

The tilting hopper opens with an electrically operated jack, while the screen and granule bin can be handled by a single operator. The unique screen cradle design does not require the removal of bolts in order to remove the screen, and the granule bin slides out easily. The same tool is used to unlock the front door and to rotate the rotor. As an option, a light can be fitted to provide extra illumination.

The FlexiPUSH is a pneumatically driven pusher and is intended for handling basic applications, including lumpy materials. It can handle large products such as a 1200-L IBC (Intermediate Bulk Container) for example. The hydraulically powered PowerPUSH maximizes output for shredding sheet and film. The cutting chamber features a textured floor to reduce the risk of material adhering or finding its way under the pusher and is offset by 5 degrees to enable liquids to drain away.

The unique QuadCUT cutting system for general plastic waste features a solid knife that allows the full use of all four cutting edges. The cutting system is extremely durable and has a rock solid clamping system attaching the knife to the rotor. The knives are supported by a sacrificial washer in order to protect the rotor should non-plastic material accidently enter the cutting chamber.

The base of the Raptor Shedder series is also equipped with the Rapid MCB feature (Mineral Composite Base) which absorbs stress and vibration during operation and gives the shredder a very solid footing and a low center of gravity.

The Raptors can also be configured in the Rapid DUO concept, with a floor-standing granulator located directly beneath the output of the shredder.

Related Exhibition:
K 2016 International Trade Fair
International Trade Fair for Plastics and Rubber
10/19/2016 - 10/26/2016
Venue: Messe Dusseldorf Fairgrounds, Dusseldorf, Germany

Related News
  • Pallmann highlights benefits of PolyGrinder® system at Plast Milano 3/10/2015
  • NPE 2015: EREMA on a course of expansion in the USA 1/30/2015
  • Pallmann HydroFiner separates laminated plastics from paper packaging and labels on a large scale 11/16/2013
  • The Almighty Pallmann Tiger Shredder Brought a Bright Future for Chinese Recycling Industry 8/8/2011
  • Plastic Cracking Machines Exhibitions
    Chemical Recycling North America - 2022
    Houston TX, United States
    ChinaReplas 2021
    4/8/2021 - 4/9/2021
    Shenzhen, China
    Plastics Recycling Conference 2022
    TBD, United States
    Re|focus 2021
    5/17/2021 - 5/21/2021
    Orlando FL, United States
    SCAPET 2021
    5/26/2021 - 5/28/2021
    Lima, Peru
    More Trade Shows

    About newMaker | Gold Suppliers | Contact Us | | | newMaker China | My newMaker  
    © All Rights Reserved